What year is it? FI or carbed?

 

I wanna say 2007 r 2008 and it's fuel injected

 

Then its at least an 08. The pump is in the tank. Can you hear it running at all? If no and no fuel comes out of the like when the key is on, then check the fuses and all the connectors to the pump. If you here it running, its probably toast or its plugged up. either way it has to come out.

 

Ight I will go take a look at it tmrw and see what I can find

 

Ok I looked at it and ther is no noise coming out and the fuses r fine. Connections r good also he wants to buy a new one wats the cost of that?

 

Lots...check at Babbits or cheapcycleparts. I'd rule out everything else first for sure.

 

Ight man we will look at it. Well I finially tryed changing my oil seal and it's not right! The seal was to tight around the shaft then it went it to deep. I dnt think it's supose to spin with the shaft huh? What am I suppose to do? I miss the mud! Lol hahaha

 

Ight man we will look at it. Well I finially tryed changing my oil seal and it's not right! The seal was to tight around the shaft then it went it to deep. I dnt think it's supose to spin with the shaft huh? What am I suppose to do? I miss the mud! Lol hahaha

I guess the seal is the wrong one. It has to fit into the housing.

 

2 weeks ago was out riding down at Ride Royal Blue in Tennessee, got about 2 miles up in the woods hit a small jump landed bike lost power then died (about 2 seconds). towed back to the cabin, not hearing fuel pump run when key is first turned.... mess with this, mess with that, finally think, Hey lets switch some relays around and sho nuff the fuel pump relay had gone bad. turn key and all i got was 2 clicks. Found an Advance Auto bout 25 miles into town, looked up a relay that would match the pins and TA DA! ride ride ride, 70 miles of trails on the Saturday. They give us extra fuses, why not an extra relay....?

 

Happen to have that part # handy for the aftermarket Relay. I wouldn't mind having a spare in my Tools for back-up.