Kawasaki Brute Forum banner

Brute force 750 Limp mode

Tags
limpmode
2K views 1 reply 2 participants last post by  NMKAWIERIDER 
#1 ·
Hello guys , i am new here hopping can get some help ! I have a 208 Brute Force 750 and looks like it goes in to a limp mode but wires are messed up and i cant reset the belt light . Please give me some advice how can i reset it
Thanks in advance
 
#2 ·
Need to make sure the switch is set to ON and that the switch functions correctly. Some have come apart inside and if it is tripped or has a problem...or any other reason that circuit is broken, it will never reset. So pull the cover and check..and test the switch first. If it is tripped...it did it for a reason and that's because the belt either is too loose or is coming apart so check it and the deflection. Should be between 22-27mm, no more...no less.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top