Kawasaki Brute Forum banner

Question about rear swing arm removal

3K views 4 replies 3 participants last post by  newtobrute 
#1 ·
When doing the frame swap and pulling the rear swing arm on my 06 650 sra, I set the swing arm down, with the driveshaft lower than the diff. Oil started coming out eventually. I assumed this was probably normal, but is it. I would have thought there should be an oil seal to contain the oil? But I didn’t see one on the parts fiche. Is the driveshaft lubed with gear oil on this machine?
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top