Did you guys buy the package deal or buy everything seperatly?
__________________
2008 Kawasaki Brute Force 750i.
25'' Maxxis Bighorns on Black ITP SS 108s.
3000Lb Viper Winch.
Highlifter Radiator.
Highlifter Springs.
ASR X Series Tierods.
Rox Risers Solex Handlebar.
Drat Fab Lowering Kit.
VFJ Stage 3 Goodness.
EHS Airbox Lid.
<span style="color:#fffacd">Almond <span style="color:#00ff00">Secondary Spring.
Maroon Primary Spring.
On the way: Precision Steering Stabilizer, Beadlocks, New <span style="color:#ff8c00">Plastic, Muzzy Pro, VDI, Elkas...IT NEVER ENDS!!!!!!
</span></span></span>
This is one of the best mods I have done. It rides and feels 10Xs better than stock.
__________________
2008 Kawasaki Brute Force 750i.
25'' Maxxis Bighorns on Black ITP SS 108s.
3000Lb Viper Winch.
Highlifter Radiator.
Highlifter Springs.
ASR X Series Tierods.
Rox Risers Solex Handlebar.
Drat Fab Lowering Kit.
VFJ Stage 3 Goodness.
EHS Airbox Lid.
<span style="color:#fffacd">Almond <span style="color:#00ff00">Secondary Spring.
Maroon Primary Spring.
On the way: Precision Steering Stabilizer, Beadlocks, New <span style="color:#ff8c00">Plastic, Muzzy Pro, VDI, Elkas...IT NEVER ENDS!!!!!!
</span></span></span>
I ran into a slight problem with the K&N airfilter. The filter is a touch taller then stock and it makes it difficult to remove. There doesn't seem to be an issue with the TwinAir I have. So I used 3 washers to raise my dash panal up a notch and that worked great. I am going to contact Ryan at Rox to let him know.More then likely this isn't a known issue.
With my dash panel I had to bend it up about 10 degrees or so to clear the EHS lid no biggie. When I was in my backyard giving at thrashing, I discovered that I needed to put some more ass behind the bolts holding on the risers. Nothing says exciting like letteing the bike down form a wheelie and the bars keep on going, got my attention real quick.
__________________
2008 Kawasaki Brute Force 750i.
25'' Maxxis Bighorns on Black ITP SS 108s.
3000Lb Viper Winch.
Highlifter Radiator.
Highlifter Springs.
ASR X Series Tierods.
Rox Risers Solex Handlebar.
Drat Fab Lowering Kit.
VFJ Stage 3 Goodness.
EHS Airbox Lid.
<span style="color:#fffacd">Almond <span style="color:#00ff00">Secondary Spring.
Maroon Primary Spring.
On the way: Precision Steering Stabilizer, Beadlocks, New <span style="color:#ff8c00">Plastic, Muzzy Pro, VDI, Elkas...IT NEVER ENDS!!!!!!
</span></span></span>
__________________
2008 Kawasaki Brute Force 750i.
25'' Maxxis Bighorns on Black ITP SS 108s.
3000Lb Viper Winch.
Highlifter Radiator.
Highlifter Springs.
ASR X Series Tierods.
Rox Risers Solex Handlebar.
Drat Fab Lowering Kit.
VFJ Stage 3 Goodness.
EHS Airbox Lid.
<span style="color:#fffacd">Almond <span style="color:#00ff00">Secondary Spring.
Maroon Primary Spring.
On the way: Precision Steering Stabilizer, Beadlocks, New <span style="color:#ff8c00">Plastic, Muzzy Pro, VDI, Elkas...IT NEVER ENDS!!!!!!
</span></span></span>
i just orderd this set up. what did you guys put on for new hand grips?[/b][/b]
I installed this setup last week and then spent a week in Errol NH trying it out. wow what a great ride. put this on you ride you wont be disapointed. cheap money and only took about 1/2 an hour to install.
REVIEW: ROX RISERS & SOLEX BARS
Linear Mode
