Video is up and running

[SWBF900]

Another "Thanks", goes to NMKAWIERIDER.
So far out of the 3 Vids I posted last night, one is up and running. I deleted the 1st try Vid, after 24 hrs I figured it was never going to post.
I still have some jitter's on my PC while watching the 9 minute Video but not even close to what I had before I got it to upload.
Not sure if my Present PC can be updated with the needed upgrades, as I need a dual-core and this PC doesn't support that. For now, I'll just use what I have.
Once again I need advice on how to Copy & Paste as I can't seem to get it to do it..
Anyway, the vid is on VholdR and I am using "SWBF".

[NMKAWIERIDER]

Originally Posted by SWBF900

Another "Thanks", goes to NMKAWIERIDER.
So far out of the 3 Vids I posted last night, one is up and running. I deleted the 1st try Vid, after 24 hrs I figured it was never going to post.
I still have some jitter's on my PC while watching the 9 minute Video but not even close to what I had before I got it to upload.
Not sure if my Present PC can be updated with the needed upgrades, as I need a dual-core and this PC doesn't support that. For now, I'll just use what I have.
Once again I need advice on how to Copy & Paste as I can't seem to get it to do it..
Anyway, the vid is on VholdR and I am using "SWBF".

Man that's clear. But...even my PC is experiencing some jerkyness. I guess we both just need to upgrade...hehe. From what I am reading, a lot of it (not all of it) can be corrected with a video/graphics card upgrade which can be about 50 bucks.

Anyway, wow...that 1080i sure looks good.

Here is the link to the vid:

http://vholdr.com/node/82112

[SWBF900]

The other two VIDs did not load, so I deleted them and will do them again. One is really edited down in size and the other is only 5 minutes.

[NMKAWIERIDER]

Originally Posted by SWBF900

The other two VIDs did not load, so I deleted them and will do them again. One is really edited down in size and the other is only 5 minutes.

Should be fine. Love watching vids with ME in it...hehe

On the Cut & Paste, are we talking bout the links? If so, just go to your account on vHoldr, click on the video you want, then at the top in the address bar, just highlight it and copy it (CTRL C). Then on the post at BC (or anywhere else) juts paste (Ctrl V). That's the easiest way. You can also Make some text into a link. Gearslayer had a video at the top of the video/Photo section on how to do that.

[SWBF900]

Thanks again..

[NMKAWIERIDER]

Originally Posted by SWBF900

Thanks again..

My pleasure!

[SWBF900]

Number 2 is up and Running, very short at under 2 minutes. I stopped recording b/c of that clicking noise, the cam strap was hitting the side of the Helmet, so I stopped to remove it.

SWBF900's #2 Monticello Video

[NMKAWIERIDER]

They have made a big improvement on the sound quality over mine. I know you still have the sticker on the bottom of yours that covers the mic hole but even when I put mine back on, its still no where as good as yours is.

[SWBF900]

I've got the Mic turned way down, may need to turn it up a just a bit.
I still get wind noise but I'll stick some velcor in front of the mic opening to see if that will cut the wind out on the next ride.
I cleaned the hard drive Disc, hard drive defrag then I did the Windows Disc clean-up, all n all that took a good 3 hours, then I went to the easy edit and tried uploading the Vid's, so far they are still uploading, the last one is uploading right now. I also turned off the other programs that were running, don't know if that helped or not.
I still don't see where to copy & paste on the Vid.

OK, the Last VID is up and running, took 3.5 hours and is right around 5 minutes long.

Here is the link:

http://vholdr.com/node/82229

[Slumlord]

Vid one is much better!! I like the riding down the creek section in the canyon... and the higher speed parts.. Nice vid.. That looked like much frickin fun...