jetting

[bruteforceriderohio]

ok here is what I have it has a penland slip on dynatek cdi with a uni air filter what jets should I use

[NMKAWIERIDER]

Originally Posted by bruteforceriderohio

ok here is what I have it has a penland slip on dynatek cdi with a uni air filter what jets should I use

What year and size Brute do you have again? What is your elivation? Has there been any previous changes? Are you running a Dynojet kit?

[bruteforceriderohio]

its a 750 I got the hmf kit

[NMKAWIERIDER]

Originally Posted by bruteforceriderohio

its a 750 I got the hmf kit

If you are under 3900 feet, and the plugs are running on the light-side, I would guess one size up should do it. But check the plugs first. The CDI needs a little more bit not enough for a jet change, the airfilters don't count but the HMF will...a size or so. And probably another 1/4 turn out on the a/f

The stock jets were 152 front and 158 rear.

Does anyone have any other input here?

[bruteforceriderohio]

the plugs are dark should i go by the pipes web site and use the jets it calls for

[NMKAWIERIDER]

Originally Posted by bruteforceriderohio

the plugs are dark should i go by the pipes web site and use the jets it calls for

Wouldn't hurt to see what they say....and see hat you have now.