650i muzzy jetting

BrianMc · April 30th, 2009, 09:51 PM

This question has probly been asked, but Im asking again cause I cant find anything.

Basicly, ive ordered a dynatek. My jetting has been spot on with the current mods in my sig, but what do I need to change when I plug the dyna in there?

VTprairie · April 30th, 2009, 09:54 PM

shouldn't have to do anything maybe jump up your pilot to 40 but should be right on

NMKAWIERIDER · April 30th, 2009, 10:24 PM

<div class='quotetop'>QUOTE (VTprairie @ Apr 30 2009, 06:54 PM) <{POST_SNAPBACK}></div>

Quote:

shouldn't have to do anything maybe jump up your pilot to 40 but should be right on[/b]

x2 maybe some shims on the needles...maybe not. No main rejetting for sure.

BrianMc · April 30th, 2009, 11:03 PM

that is kinda what I thought, thanks fellers

btw: are these "shims" just little brass washers from a hardware store?

NMKAWIERIDER · May 1st, 2009, 02:06 AM

<div class='quotetop'>QUOTE (BrianMc @ Apr 30 2009, 08:03 PM) <{POST_SNAPBACK}></div>

Quote:

that is kinda what I thought, thanks fellers

btw: are these "shims" just little brass washers from a hardware store?[/b]

EHS Racing has them Take a look at the bottom of this page.

http://wwm.ehsracing.com/store/items.aspx?...ETS&key=cat

VTprairie · May 2nd, 2009, 02:00 AM

yeah I got mine from the hardware store I think they are #4's if you have a micrometer to size them some vary a little in size.

BrianMc · May 25th, 2009, 07:57 PM

on EHS's site here, what 'series' of pilot jet do i need for my brute? I know i want #40's but 21,22,74 series? what the deuce

NMKAWIERIDER · May 25th, 2009, 08:19 PM

<div class='quotetop'>QUOTE (BrianMc @ May 25 2009, 04:57 PM) <{POST_SNAPBACK}></div>

Quote:

on EHS's site here, what 'series' of pilot jet do i need for my brute? I know i want #40's but 21,22,74 series? what the deuce[/b]

74 series. Looks like this.
[attachment=2069:Pilot_Jet.JPG]